User`s manual

Moxa VPort 26A-1MP Getting Started
2-5
Step 4: Mount the bottom case on the ceiling or accessory’s mounting kit
(VP-MK2)
a) Mounting on the ceiling
Step 1:
Use the installation stick or attach the bottom case to the appropriate mounting location on the
wall, and mark the positions of the four screw holes with a pen or a pencil.
Step 2:
In
the marked locations, drill a hole slightly smaller than the supplied screw anchors.
Step 3:
P
ut anchors into these drilled holes.
Step 4:
Fasten the
bottom case with the four self-tap screws.
b) Mounting on the accessory’s mounting kit (VP-MK2)
Step
1:
Fasten the bottom case on the plate with the four machine screws, which are provided in VP
-
MK2’s
accessory package.
Step 2:
Assemble the mounting kit with the selected accessory.
VPort 26A-1MP + VP-MK2 + VP-520L VPort 26A-1MP + VP-MK2 + VP-520HB
NOTE
Choose the appropriate mounting accessories based on the installation requirements.