User`s manual

SoftDVR™ Lite/Pro User’s Manual Application Settings
Modifying User Privilege
1. Select the user you want to modify from the list. Information and privilege of this user will be
shown on the User Management page.
2. Make the necessary changes.
3. Click on Update to modify. Click on OK to save the settings and return to the Main
Window.
Removing a User
To remove a user from the list, select the user you want to remove and click on Remove to delete
this user.
Alarm (SoftDVR™ Pro only)
SoftDVR™ Pro provides an Alarm function that can integrate DI/DO devices and VPort Series
Video Servers to create a more intelligent video Surveillance system.
SoftDVR™ Pro Alarm Page
Alarm
Triggered
Condition
Camera
Selection
DI Status,
DO Control
Alarm List
Alarm
Triggered
Action
Alarm
Description
Camera
Selection
DI Status,
DO Control
Alarm List
Alarm
Triggered
Action
Alarm
Description
Alarm
Triggered
Condition
Adding a New Alarm
1. Select the camera for which you wish to set up an alarm-triggering recording action.
2. Select Alarm Condition (i.e. what causes the alarm to go off)
Motion Detect: Upon Video Motion Detection (refer to Recording section for information on
setting up VMD)
Video Lost: Upon loss of video/camera connection or ability to capture video images
DI1, DI2, DI3, and DI4: Upon activation of digital input devices/sensors connected with
Moxa VPort products
3. Set up the Trigger Operation.(i.e. what happens after the alarm goes off)
4-18