User`s manual

SoftDVR™ Lite/Pro User’s Manual Application Settings
NOTE
Video Size (Resolution) Selection for VPort 2100 Series
Half Standard Double
NTSC 176 x 112 352 x 240 704 x 480
PAL 176 x 144 352 x 288 704 x 576
NOTE
How to set up a custom PTZ camera:
Click on Custom PTZ Command. A window will open for programming the custom camera
PTZ control by using PTZ control protocols provided by the PTZ camera’s manufacturer. Click
on Save to save programming data, and then click on Exit to return to the Camera/Device
Setting page.
Step 3: Show the video image to see if the VPort’s settings are correct
When the settings of a VPort product are complete, administrators can click on View Image to see
if the camera’s settings are correct.
Step 4: Update the Camera List
After configuring all settings of a VPort, click on Update List to add this camera to the camera list.
Step 5: Save the settings in SoftDVR Pro
Click on OK to save camera/device settings to SoftDVR. The system will return to the SoftDVR’s
main window.
Removing a Camera
To remove a camera, select the camera you wish to remove, and then click on Remove Camera.
Click on OK to save the modifications and return to the SoftDVR main window.
Modifying a Camera’s Settings
Administrators may want to change the settings of a camera or of A VPort. To do so, click on a
camera in the camera list and click on it. The configuration information for this camera or VPort
will be listed. For the description of each setting, refer to the Adding a New Camera section
above.
4-5