User`s manual

SoftDVR™ Lite/Pro User’s Manual General Operation
After configuring the cameras, four options will appear in the selection list when you click on a
camera: Setting Camera, Remove Camera, Move Camera, and Show Image.
1. Setting Camera: Selecting this option will open that camera’s configuration window.
2. Remove Camera: Selecting this option will delete that camera.
3. Move Camera: Selecting this option will move that camera to the desired position. Click on
this option again to locate the camera.
Show Image: Selecting this option will go back to the Main Page, and video images from that
camera will be shown in the window.
Camera and Alarm Actions Log Window (SoftDVR™ Pro only)
The Camera and Alarm Actions Log window is located in the bottom left corner of the Main
Window. The log window shows the camera and alarm actions history, and provides information
to users about how the camera and the alarm system work.
Repair Database
SoftDVR™ Lite/Pro provides a Repair Database function to re-organize recorded file database.
Repairing file information can increase the search and playback speed.
1. Select the camera and the hard disk needed to be repaired.
2. Click on User Setting Path to start the repair process.
3-13