User`s manual

SoftDVR™ Lite/Pro User’s Manual General Operation
Steps to access SoftDVR™ Pro’s web service
1. Type http://IP:Port in the address line of the web browser, where IP is the IP address
of SoftDVR™ Pro’s web server, and Port is the web server’s TCP port number (e.g.,
http://192.168.2.1:82). You do not need to type the web server’s TCP port number if the web
server is the same as the system default setting.
2. Enter the user name and password when prompted.
3. The main page will open next.
Input the
SoftDVR’s IP
as the URL
Camera
view and
control
Main
Screen
Viewing format
and Playback
selection
Input the
SoftDVR’s IP
as the URL
Camera
view and
control
Main
Screen
Viewing format
and Playback
selection
Camera
view and
control
Main
Screen
Viewing format
and Playback
selection
Administrators can set up user privileges to the Remote Service in the Application
Setting/User Management page.
NOTE
Moxa SoftDVR™ Lite IP Surveillance Software is a PC version for use on a single PC. The
Remote Service function will be disabled on the Main Window.
NOTE
Remote Service provides clients with remote accessibility to SoftDVR™ Pro. However, since a
lot of system resources are needed for SoftDVR™ Pro’s viewing and recording functions, the
video rate performance of remote service is greatly influenced by the number of cameras in the
SoftDVR™ Pro system, the network bandwidth, and how many users access the SoftDVR™ Pro
server at the same time.
3-7