User`s manual

SoftDVR™ Lite/Pro User’s Manual General Operation
Camera View Buttons
1 view 4 views 6 views 8 views 9 views 10 views 13 views 16 views
Full Screen View Button
Camera Scan
SoftDVR™ Lite only supports 2 viewing formats, 1- and 4-channel. This is because SoftDVR™
Lite can only show images from a maximum of 4 cameras. Furthermore, there are no Full Screen
View and Camera Scan buttons, although the Camera View buttons are clearly visible at the
bottom of the Main Window.
NOTE
To identify which camera’s image is shown on a multi-view screen, set up a camera ID in
Application Setting/Device/Camera Setting when you add a new camera, and click the
Camera ID in the Camera Caption area in Application Setting/General Setting.
Camera Actions
A Camera Selection List located at the bottom of the Main Window allows users to select a
camera by clicking on the camera ID buttons to see actions for the selected camera.
Camera ID Buttons
Cameras are identified by numbers from 1 to 16.
Camera Display
A white Camera ID Button indicates that the camera is live.
A red Camera ID Button indicates that the camera is not connected.
PTZ Camera Control Buttons
Users can use the following buttons to control or operate the cameras. If a camera is equipped with
PTZ control, the PTZ operation button will be shown on the right side of the Main Window.
PAN/TILT ZOOM FOCUS PAN Speed TILT Speed Preset Location
3-5