User`s manual

SoftDVR™ Lite/Pro User’s Manual General Operation
Camera Window
Motion
Indicator
Motion
Indicator
Recording
Indicator DI
Connection
Indicator DI
Connection
Indicator Camera IDCamera ID Camera NameCamera Name
Recording
Indicator
For each camera window, some information is shown above the video image.
Camera ID: This ID is based on the order in which the cameras are added. There are between 1
and 16 IDs when using SoftDVR Pro, and between 1 and 4 when using SoftDVR Lite.
Camera Name: The camera name is set up in the Camera/Device setting section. For details, refer
to the Chapter 4, Application Settings.
DI: Small boxes are used to show the status of the DI. For example, if VPort 2310 and VPort 2110
are used, you will see 1 box in this location to show DI1, and there will be 4 boxes when using
VPort 2140 to show DI1, DI2, DI3, and DI4. The box will turn green if the DI is linked.
Connection Indicator: This box shows the status of the video signal received by SoftDVR. When
the video signal is received continuously, this box will blink green.
Motion Indicator: This box shows if the Video Motion Detection is triggered or not. When it is
triggered, a red “M” will appear in the box.
Recording Indicator: A red “REC” will appear in this box if images are being recorded.
NOTE
For some VPort products, such as VPort 2100 series MJPEG video servers, enable the Text on
Video function to show text in the left corner of the video image.
Viewing Formats
SoftDVR™ Pro supports 8 viewing formats: 1, 4, 6, 8, 9, 10, 13, or 16 channels on the screen. Use
the Camera View buttons to change the viewing format easily. In addition, Full Screen and
Camera Scan are provided for customized viewing.
When viewing video images, users can click on images directly to enlarge or reduce the size of the
image.
3-4