User`s manual

VPort D351 User’s Manual Introduction
Product Features
High performance video/audio networking solution
y 1-channel video output for analog NTSC/ PAL video signals
y 1 audio input and 1 audio output for 2-way voice communication
y 1 auto-sensing 10/100BaseT(X) Ethernet port
y TCP, UDP, HTTP, and multicast network transmission modes
y 1 RS-232/422/485 PTZ port with serial-to-Ethernet Real COM mode for remote PTZ control
with existing legacy PTZ control devices (PTZ control driver NOT required)
y Capability to decode different video stream resolutions from video encoder with a maximum of
540 TVL lines
y Maximum of 64 video sources can be set up as the decode video source
y Can manually select the video source, or set up automatic scanning for video sources
y Supports using the 2 digital inputs to switch the video source
y Supports SNMP (V1/V2C/V3) for network system integration and management
y Built-in web server and RS-232 console for remote access and configuration
y Supports OSD (On-Screen Display)
y UPnP and IP filtering supported
Industrial Rugged Design
y 2 12/24 VDC and 24 VAC redundant power inputs with LED indicators
y 35 mm DIN-rail mounting or panel mounting installation (with optional accessories)
y IP30 protection form factor
y CE, FCC, and UL508 indistrial certifications
Intelligent Alarm Trigger
y Equipped with 2 DIs and 2 relays (DO) for external sensors and alarms
y Can be set up to switch automatically to a specific video source in response to an event
triggered by the VPort video encoder
y Supports SMTP for system or alarm message transmission
NOTE
Please link to Moxa’s website to download the VPort D351’s CGI commands if you need the
commands for your system integration.
1-4