User`s manual

VPort D351 User’s Manual How to setup the alarm trigger function
C-2
LED Indicators
PW1 Power 1
PW2 Power 2
FAULT
Can be set up to correspond to system alarm, power failure, or
network down
STATE System boots properly or not
Power
Input 2 12/24 VDC or 24 VAC inputs to provide redundancy
Consumption Approximately 8W
Physical Propertires
Casing IP30 protection, metal case
Dimensions (W x D x H) 52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in.)
Weight 910 g
Installation DIN-Rail or wall mounting (with optional WK-46 kit)
Environmental Limits
Operating Temperature 0 to 60°C (32 to 140°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Regulatory Approvals
Safety UL 508
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), Level 2
EN61000-4-3 (RS), Level 3 EN61000-4-4 (EFT), Level 3
EN61000-4-5 (Surge), Level 3 EN61000-4-6 (CS), Level 3
EN61000-4-12 (Oscillatory wave immunity), Level 3
Shock IEC60068-2-27
Freefall IEC60068-2-32
Vibration IEC60068-2-6
MTBF 160,000 hours
WARRANTY 5 years
Alarm Features
y Automatically switch to the video source once an event is triggered at video source site
y Daily repeat timing schedule for DI sensors
y JPEG snapshots for pre/trigger/post alarm images
y Automatic transfer of stored images by email with event-triggered actions
Security
y Administrator’s password protection
y Accessible IP address filtering