User`s manual

VPort D351 User’s Manual System Configuration
2. Message=xxxx is for the description of this alarm. Users can customize some information to
describe this alarm. For example, if the DI1 alarm is triggered in low status, the user can use
Message=DI1Low to get the DI1Low information from the video source log.
Customized software
Users also can program customized software to send the alarm message to the VPort D351 for the
alarm trigger function. Users will need to program the sendalarm.cgi command into the software.
Syntax:
http://<server>/moxa-cgi/sendalarm.cgi?address=xxxx&cameraidx=xxxx&message=xxxx
Example:
http://192.168.127.100/moxa-cgi/sendalarm.cgi
address=192.168.127.100&cameraidx=1&message=DI1low
4-3