User`s manual

VPort D351 User’s Manual Technical Specifications
a. Connect loss block: The connect loss block is shown in yellow to indicate the status of the
video source.
y Stable yellow: video source is connected.
y Blinking yellow: the video source is disconnected or has trouble sending video streams.
b. Alarm block: the alarm block is shown in red to indicate the status of the alarm being trigged
from the video source site.
y Stable red: no alarm is detected.
y Blinking red: an alarm is being triggered.
In addition to these 2 color blocks, 2 additional pieces of video source information can be shown
on the video image.
a. Source Address: the domain name or IP address of the video source
b. Source Description: the customized information of the video source
Both pieces of information can be set up to be located on the video images by setting the locations
of the X Axis and Y Axis.
Setting Description Default
Source Address
Enable or disable the source address
being displayed on the video image
enable
Source Description
Enable or disable the source description
being displayed on the video image
enable
X Axis
Set up the X axis of the video source
information display location
3
(1-45)
Y Axis
Set up the Y axis of the video source
information display location
27
(4-30)
Show Connect Loss
block
Enable or disable the display of the
connect loss block
enable
Show Alarm block
Enable or disable the display of the alarm
block
enable
NOTE
The OSD (on-screen display) can be used to give users the video source status and information
from the analog video display. The Administrator should set up the location of the video source
information properly for easy viewing.
A-19