User`s manual

VPort D351 User’s Manual Technical Specifications
Alarm Trigger
To enable or disable the alarm trigger
function, which is for immediately
changing the video source to the
alarm–triggered video source
Enable
Transparent PTZ
Enable or disable the transparent PTZ
control function
disable
Audio post
Enable or disable the function for posting
audio with video
disable
NOTE
To enable the Alarm trigger function, the video source must be set up to send alarm messages via
the sendalarm.cgi command. Please refer to the Appendix A, “How to Set Up the Alarm Trigger
Function.”
b. Search
The Search function is used to search for video source devices on the network that are on the same
domain network as the computer that you are searching from. After the search, the administrator
can select the video source device and then click Add to List to add this video source to the video
source list. After that, the administrator can use the Modify function to edit the video source
configurations.
c. Remove Select
This button is for deleting the video source being selected (check the check box).
d. Modify
This button can edit the configurations of the selected video source.
A-17