User`s manual

VPort D351 User’s Manual Technical Specifications
NOTE
The Alarm Trigger Interval is used for the alarm buffer, and is used to prevent several alarms
from being triggered at the same time. Otherwise, there could be a conflict in the operation of the
video source switch. For this reason, you must set up a time interval between the 2 alarms. The
alarms triggered during this time interval will be ignored.
The following description shows how to set up the video source list.
a. Add Video Source
Setting Description Default
Idx
The video source index for video source
information and selection.
1 (1 to 64)
Address
The domain name or IP address of the
video source
Blank (max. 64 bytes)
Description
Customized video source information to
give users more information about the
video source.
Blank (max. 40 bytes)
Camera Idx
Camera index of the video source. For
example, if you are using 4-channel video
encoders, the camera idx can help
identify which channel is for the video
source.
1
HTTP port The port number of the video source 80
Password
The password of the administrator’s
account used to access the video source
Blank (max. 14 bytes)
Video type The video modulation to be decoded Auto detect
Protocol (MPEG4)
The transmission protocol for MPEG4
video streams
TCP
Media
To select the decode mode as video &
audio, video only, or audio only
Video & audio
OSD
To enable or disable the OSD (on-screen
display) function
Enable
A-16