User`s manual

VPort D351 User’s Manual Technical Specifications
Trap Settings
Setting Description Default
Trap Server
IP/Name
Enter the IP address or name of the Trap
Server used by your network.
No
Trap Community
Use a community string match for
authentication; maximum of 30 characters.
No
Private MIB information
The private SNMP Object ID of the VPort is the enterprise value: 8691.8.1.2. This number cannot
be changed.
Video Source
Video Source List
A maximum of 64 video sources can be added to the VPort D351’s video source list. The
Administrator can configure the video source operation settings on this page.
Video Source Switch Mode
Setting Description Default
Enable DI change
Enable the video source change via the
DI.
DI 1 selects UP (from 1 to 2)
DI2 selects DOWN (from 2 to 1)
Disabled
Auto Scan
Enable the video source change in
automatically scanning all the video
sources in the list
Disabled
Interval
Time interval for switching the current
video source to the next video source in
auto scan mode
30 sec
(10-999)
Alarm Trigger Interval
Time interval for doing the video source
switch once the next alarm is triggered.
3 sec
(3-999)
A-15