User`s manual

VPort D351 User’s Manual Technical Specifications
For SNMP V3, there are two levels of privilege for different accounts to access the VPort. Admin
privilege allows access and authorization to read and write MIB files. User privilege only assigns
read-access of MIB files, but does not assign write-access.
Root Auth. Type (For SNMP V1, V2c, V3, and V3 only)
Setting Description Default
No-Auth
Use admin account to access objects. No
authentication
No
MD5-Auth
Provide authentication based on the
HMAC-MD5 algorithms. 8-character
passwords are the minimum requirement
for authentication.
No
SHA- Auth
Provide authentication based on the
MAC-SHA algorithms. 8-character
passwords are the minimum requirement
for authentication.
No
Root Data Encryption Key (For SNMP V1, V2c, V3, and V3 only)
Setting Description Default
Enable
The data encryption key must be between 8
and 30 characters
No
Disable No data encryption No
User Auth. Type (For SNMP V1, V2c, V3, and V3 only)
Setting Description Default
No-Auth
Use admin or user account to access
objects; authentication not required
No
MD5-Auth
Provides authentication based on the
HMAC-MD5 algorithms; 8-character
passwords are the minimum requirement
for authentication.
No
SHA- Auth
Provides authentication based on the
HMAC-SHA algorithms’ 8-character
passwords are the minimum requirement
for authentication.
No
User Data Encryption Key (For SNMP V1, V2c, V3, and V3 only)
Setting Description Default
Enable
8-character data encryption key is the
minimum requirement for data encryption.
Maximum 30-character encryption key
No
Disable No data encryption No
A-14