User`s manual

VPort D351 User’s Manual Technical Specifications
Setting Description Default
Enable UPnP Enable or disable the UPnP function. Enable
Accessible IP List
The VPort D351 uses an IP address-based filtering method to control access to the VPort.
Accessible IP Settings allows you to add or remove “Legal” remote host IP addresses to prevent
unauthorized access. Access to the VPort is controlled by IP address. That is, if a host’s IP address
is in the accessible IP table, then the host will be allowed access to the VPort. Administrators can
allow one of the following cases by setting this parameter:
y Only one host with a specific IP address can access the VPort.
Enter “IP address/255.255.255.255” (e.g., 192.168.1.1/255.255.255.255)
y Hosts on a specific subnet can access the VPort.
Enter “IP address/255.255.255.0” (e.g., “192.168.1.0/255.255.255.0”)
y Any host can access the VPort.
Disable this function.
A-11