User`s manual

VPort D351 User’s Manual Technical Specifications
1st SMTP Server and Sender Email
Setting Description Default
1st SMTP (mail)
server
SMTP Server’s IP address or URL
address.
None
1st SMTP account
name
None
1st SMTP password
For security reasons, most SMTP servers
require the account name and password
to be authenticated.
None
1st Sender’s email
address
For security reasons, SMTP servers must
see the exact sender email address.
None
NOTE
Note that if the Sender’s email address is not set, a warning message will pop up and the e-mail
system will not be allowed to operate.
NOTE
The 2nd SMTP Server and Sender Email are backups that are used if the 1st SMTP Server and
Sender Email fail when connecting or sending email.
Two recipient email accounts are available for receiving emails sent by the VPort. For redundancy,
both addresses receive the messages and alarm snapshots simultaneously.
Setting Description Default
1st Recipient’s Email
Address
Email address of the 1st recipient. None
2nd Recipient’s Email
Address
Email address of the 2nd recipient. None
Universal PnP
UPnP (Universal Plug & Play) is a networking architecture that provides compatibility between
networking equipment, software, and peripherals of the 400+ vendors that are part of the Universal
Plug and Play Forum. This means that they are listed in the network devices table for the operating
system (such as Windows XP) supported by this function. Users can link to the VPort directly by
clicking on the VPort listed in the network devices table.
A-10