User`s manual

VPort D351 User’s Manual Technical Specifications
Using the Web-based Manager for System Configuration
System configuration can be done remotely with Internet Explorer through the web server.
Alternatively, administrators may type the system configuration URL, http://<IP address of
Video Server>/setup/config.html, to enter the configuration page directly. Administrators who
wish to set up certain options using the URL should refer to the relevant section in Chapter 6,
URL Commands, for information about advanced functions.
Five categories of configuration are involved in configuring the system: System, Network, Video,
Audio, and Alarm. A description of each configuration item is shown in the table below:
Category Item Description and Contents
General Set Host Name and Date/Time
Accounts Administrator Account Privileges Management
Diagnosis Self-diagnostic report with system, communication,
power and IO status
System Log System Log and operation information
System Parameter System parameters information and Import/Export
functions
Firmware Upgrade Remote Firmware Upgrade
Factory Default Reset to Factory Default
System
Reboot Reboot the VPort
General The IP network settings of this VPort
SMTP Server Set up Primary and Secondary SMTP Server and e-mail
accounts
Universal PnP Enable UPnP function
Multicast Set up Multicast (IGMP) Streaming
Accessible IP Set up a list to control the access permission of clients
by checking their IP address
Network
SNMP Configure the settings of SNMP
Video Source List Edit/List video source
Video Source
Video Source Log Log video source
OSD Settings Configure the OSD strings of video image
Video
Video Output Select the video's modulation (NTSC, PAL)
Audio
Audio Setting Configure the Audio Input/Output
Transparent
PTZ
Transparent PTZ
Setting
Configure the Transparent PTZ
System Alarm Configure Power Failure and Network Connection
Broken alarms
Basic General settings of event alarm
Schedule Set up the Alarm schedule
Alarm
Event
Alarm
Digital Input Configure the Digital Input Alarm
This table also appears on the System Configuration Æ Overview webpage.
A-2