User`s manual

VPort D351 User’s Manual Getting Started
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should already be attached to the back panel of the
VPort D351 when you take it out of the box. If you need to reattach the DIN-Rail attachment plate
to the VPort D351, make sure the stiff metal spring is situated towards the top, as shown in the
figures below.
STEP 1:
Insert the top of the DIN-Rail into the slot just
below the stiff metal spring.
STEP 2:
The DIN-Rail attachment unit will snap into
place as shown below.
metal
spring
DIN-Rail
metal
spring
DIN-Rail
To remove the VPort D351 from the DIN-Rail, simply reverse Steps 1 and 2 above.
Wall Mounting (Optional)
For some applications, you will find it convenient to mount the VPort D351 on the wall, as shown
in the diagrams below.
STEP 1:
Remove the aluminum DIN-Rail attachment plate from VPort 351, and then attach the wall
mounting plates, as shown in the diagrams below.
⇒
Top
plate
Bottom
plate
2-11