User`s manual
VPort D351 User’s Manual Getting Started
RS-232 Console Configuration (115200, None, 8, 1, VT100)
NOTE
Connection Caution!
1. You cannot connect to the VPort D351 simultaneously by serial console and Telnet.
2. You can connect to VPort D351 simultaneously by web browser and serial console, or by
web browser and Telnet.
We strongly recommend that you do NOT use more than one connection method at the same
time. Following this advice will allow you to maintain better control over the configuration
of your VPort D351.
NOTE
We recommend using Moxa PComm Terminal Emulator, which can be downloaded free of
charge from Moxa’s website.
Before running PComm Terminal Emulator, use an RJ45 to DB9-F (or RJ45 to DB25-F) cable to
connect the VPort D351’s RS-232 console port to your PC’s COM port (generally COM1 or
COM2, depending on how your system is set up).
After installing PComm Terminal Emulator, perform the following steps to access the RS-232
console utility.
1. From the Windows desktop, click Start Æ Programs Æ PCommLite2.5 Æ Terminal
Emulator.
2. Select Open under Port Manager to open a new connection.
2-7