User`s manual

VPort D351 User’s Manual Getting Started
NOTE
Broadcast Search can only search for devices connected to the same LAN domain as the VPort.
If your devices are located on a different LAN domain, use the Specify IP Address function to
search for the device by keying in the IP address.
4. Double click the selected VPort, or use the IE web browser to access the VPort’s web-based
manager (web console).
Network Environment without DHCP Server
If your VPort D351 is connected to a network that does not have a DHCP server, you will need to
configure the IP address manually. The default IP address of the VPort D351 is 192.168.127.100
and the default subnet mask is 255.255.255.0. Note that you may need to change your computer’s
IP address and subnet mask so that the computer is on the same subnet as the VPort.
To change the IP address of the VPort manually, access the VPort’s web server, and then navigate
to the System Configuration Æ Network Æ General page to configure the IP address and other
network settings. Check the Use fixed IP address checkbox to ensure that the IP address you
assign is not deleted each time the VPort is restarted.
Step 7: Accessing the VPort D351 Web-based Manager
1. Type the IP address in the web browser’s address input box and then press enter to connect to
the homepage of the VPort D351’s web-based manager.
2-5