User`s manual

E
E
Appendix E Technical Specifications
System
CPU: Trimedia PNX1302
RAM: 32MB SDRAM
ROM: 4MB FLASH ROM
Networking
Adjustable bandwidth limit
Protocols
TCP/IP, HTTP, SMTP, FTP, Telnet, NTP, DNS,
DDNS, DHCP, UPnP and PPPoE
Ethernet
10BaseT Ethernet or 100BaseT Fast Ethernet
auto negotiation
Video
Algorithms Supported
MJPEG
Video Inputs and Outputs
4 BNC video inputs with 75Ω terminal switch
NTSC/PAL auto-sensing
Features
Adjustable image size and quality
B/W or color control
Quad screen display
Timestamp and text overlay
5 privacy masks for each camera
Three configurable motion detection windows
Resolution
NTSC
Up to 30 frames at 176x112
Up to 30 frames at 352x240
Up to 10 frames at 704x480 or quad
PAL
Up to 25 frames at 176x144
Up to 25 frames at 352x288
Up to 10 frames at 704x576
LED Indicators
NETWORK:
ACTIVE, LINK, FDX (full duplex)
SYSTEM:
POWER, CONNECT, SERIAL
Dimensions
146.2 x 163.2 x 40 mm (W x D x H)
Weight
Net. 820g
Power
Consumption: near 8W
Input: 100-240VAC, 50/60Hz, 0.4A
Output: 12VDC, 1.5A
External Power Supply: 12VDC, min. 15W
Operating Environment
Operating Temperature: 0 to 65°C/ 32 to 149°F
Storage Temperature: -40 to 70°C/ -14 to 158°F
Humidity: 95%RH
Alarm Features
4-channel motion detection with object size and
sensitivity
Daily repeat timing schedule
Pre/trrgger/post alarm
Automatic transfer of stored images via email or
FTP with event-triggered actions
PAN/TILT/ZOOM
Multiple PTZ camera control through RS-232 or
RS-485
Supported devices and protocols:
Sony VISCA protocol, Canon VC-C1, VC-C3,
VC-C4, Dynacolor SmartDOME, Samsung
SmartDome, Pelco D-protocol, Lilin
Speeddome, Ernitec Speeddome
CGI command serial driver is supported
Viewing System Requirement