User`s manual

VPort 2141 Video Encoder User’s Manual URL Commands for VPort 2141
A-9
30 (for NTSC only)
set maximum frame rate to 30 fps
0 NTSC
1 PAL
modulation
(r/w)
2
AUTO
0 NTSC actualmodulation
(r)
1 PAL
1 flip image flip
(r/w)
0
normal image
1 mirror image mirror
(r/w)
0
normal image
1 Overlay time stamp on video imprinttimestamp
(r/w)
0
Do not overlay time stamp on video
Group: Image
NAME VALUE DESCRIPTION
brightness
(r/w)
<-5 to 5> Adjust brightness of image according to mode
settings. <0>
saturation
(r/w)
<-5 to 5> Adjust saturation of image according to mode
settings. <0>
contrast
(r/w)
<-5 to 5> Adjust contrast of image according to mode
settings. <0>
hue
(r/w)
<-5 to 5> Adjust hue of image according to mode settings.
<0>
Preview Apply the parameter of image but not save
Restore Restore the last saved image parameters
mode
(w)
Save Directly save the adjust image parameters
Group: Motion1~4
NAME VALUE DESCRIPTION
0
disable motion detection
enabled
(r/w)
1 enable motion detection
0
disable motion window
winenabled_<1-3>
(r/w)
1 enable motion window
winname_<1-3>
(r/w)
<text string shorter than 14
characters >
name of motion window
<blank>
winleft_<1-3>
(r/w)
0 to 352 for CCD
0 to 320 for CMOS
Left coordinate of window position.
<0>
wintop_<1-3>
(r/w)
0 to 288 for PAL
0 to 240 for
NTSC & CMOS
Top coordinate of window position.
<0>
winwidth_<1-3>
(r/w)
0 to 352 for CCD
0 to 320 for CMOS
Width of motion detection window.
<0>