User`s manual
VPort 2141 Video Encoder User’s Manual URL Commands for VPort 2141
A-5
0 Restore the system parameters to default value. restore
(w)
Positive integer Restore the system parameters to default value
and restart the server after <value> seconds.
0 ~ 65535
Restart the server after <value> seconds.
reset
(w)
-1 Not restart the server.
H – NC connected with COMMON do<1~4>
(w)
<state>
L – NO connected with COMMON
H – NC connected with COMMON di<1~4>
(r)
<state>
L – NO connected with COMMON
supportscriptversion
(r)
<text string shorter than 10
characters>
The version of supported script/webpage
scriptversion <text string shorter than 10
characters >
The maximum version of currently installed
script/webpage
language <text string shorter than 16
characters>
The webpage language
webpageversion <text string shorter than 39
characters>
The version of webpage
0 Turn on the IR control enableir(r/w)
1
Turn off the IR control
ptzenabled
(r )
32-bit integer Indicate the operations of server supported
Group: Security
NAME VALUE DESCRIPTION
username_<1~20>
(r/w)
<text string shorter than 16
characters>
change user name.
<blank>
userpass_<0~20>
(r/w)
<text string shorter than 14
characters>
change user’s password.
The UserPass_0 is root’s password.
<blank>
userattr_<1~20>
(r/w)
[dido][|talk][|listen][|camctrl
][|conf]
change user’s privilege. The privilege can be the
combination of
dido – Permit I/O access
talk – Permit to talk to server
listen – Permit to listen from server
camctrl – Permit to do server control
conf – Permit to change server’s configuration
<blank>
usercount
(r)
1 ~ 21 The current account number on the server
including root.<1>
Group: Network
NAME VALUE DESCRIPTION
1
enable to get ipaddress, subnet, router, dns1,
dns2 from DHCP server at next reboot
resetip
(r/w)(restart)
0 Using preset ipaddress, subnet, router, dns1, dns2
ipaddress
(r/w) (restart)
<IP address> IP address of server
<192.168.0.99>