User`s manual

VPort 2141 Video Encoder User’s Manual System Configuration
4-31
Stopping Information Dumping
Typing “stop” will halt the dumping of debug information and the digital input status.
Querying the Status of Digital Inputs
Typing “diquery” will display the status of all digital inputs once.
Setting Digital Outputs
To set digital output 1 to connect NO with COMMON, type “do1=o”.
To set digital output 1 to connect NC with COMMON, type “do1=c”.
To set digital output 2 to connect NO with COMMON, type “do2=o”.
To set digital output 2 to connect NC with COMMON, type “do2=c”.
Restoring Factory Default Settings
Typing “clear” will cause the VPort 2141 to restore factory settings, but not restart. To validate the
new settings, type “reset” to cause the system to restart.
System Reset
Typing “reset” will cause the VPort 2141 to perform a software reset.