User`s manual

VPort 2141 Video Encoder User’s Manual System Configuration
4-17
PTZ Driver
Since each PTZ camera has its own protocols for the PTZ functions, select the correct PTZ model
under PTZ driver options. If the attached PTZ camera is not supported by the VPort, select
Custom Camera to enter the proprietary commands for pan, tilt, zoom, and focus control.
ATTENTION
The VPort 2141 supports the following PTZ drivers and camera models:
1. Sony Visca
2. Cannon VCC1\VCC3\VCC4
3. Pelco D protocol
4. Samsung/ SmartDome
5. Dynacolor SmartDome/Dynadome
6. Liling PIH-7x00
7. Ernitec
Port Settings
After selecting the correct PTZ driver or Generic CGI command option, configure Port settings,
which includes Baud rate, Data bits, Stop bits, and Parity bit. If the attached device is a PTZ
camera, refer to Appendix B, Settings for Supported PTZ Cameras, for default settings of the
supported PTZ cameras.