User`s manual

VPort 2141 Video Encoder User’s Manual Accessing the VPort 2141
3-2
Accessing the VPort 2141 Video Encoder
Opening Your Browser
Open your browser, type the VPort’s IP address in the Address box, and then press Enter.
Authentication
After opening your browser and typing the VPort’s IP address, a login window will appear. Enter
the User Name and Password and then click OK. When accessing the VPort for the first time,
enter “root” as the username, and the “MAC address” (in capital letters) as the password. The
MAC address is located on the VPort’s label, and can also be found when running the VPort
Installation Wizard. Primary users will be allowed to access the VPort as soon as the administrator
finishes adding user profiles. After a successful authentication, the VPort’s main page will be
displayed.
Installing the Plug-in Application
If you access the VPort for the first time via a browser that supports server push (e.g., Netscape),
the video images will be displayed directly. If you are using Windows’ Internet Explorer as your
browser, you will be asked to install a new plug-in application provided by the VPort. This plug-in
application has been registered for certification, and is used to display video images via Internet
Explorer. Click on Yes to install the plug-in application. If your browser does not allow the user to
install the plug-in, change the security option to a lower level, or contact your network supervisor
for assistance.