User`s manual

VPort 2141 Video Encoder User’s Manual Introduction
1-4
Typical Application
Product Description
Front Panel
1: RESET button
The RESET button is located on the right side of the VPort 2141’s front panel. The button can
be used to perform two levels of system recovery. “Reset” will force the system to restart, and
“Restore” will restore the factory default settings and then force the system to restart from the
initial state. The “Restore” option is generally used to perform a complete system recovery.
RESET
Click on the “RESET” button once. The system will perform a system diagnosis. If the IP
address is not fixed, you will need to use the VPort installation wizard to locate the VPort, and
get a new IP address from the DHCP server. Note that you can achieve the same effect by
disconnecting and then reconnecting the power supply.
IP: 192.168.4.100
TCP/IP
PC or Server
DI/ Relay
http://192.168.4.100
SoftDVR
Customized AP
Analog
Cameras