User`s manual

V460 Series WinCE User’s Manual System Recovery
2. Bios setup on the V460.
a. Insert the USB disk into the V460 computer.
b. Power on and press DEL to enter the bios setup menu.
c. Select [Advanced] Æ [hard Disk Boot Priority] and then press Enter.
d. In the setup menu, use ↑ or ↓ to select the USB device.
e. Press + to move the device to the top, and then press ESC to exit the setup menu.
f. Make sure the first boot device is “Hard Disk.” If not, press Enter to change it.
g. Select [Exit] Æ [Save & Exit Setup] and then press Enter.
h. Select Y to save to CMOS and exit.
4-3