User`s manual

V460 Series WinCE User’s Manual Getting Start
Starting your V460 Computer
Connect the CRT monitor or LCD monitor to the target computer, and then power it on by
connecting it to the power adaptor. It takes about 15 to 20 seconds for the system to boot up.
During the boot process, you will see the following startup screen with a progress bar.
Once the system is ready, the Windows CE desktop window will appear.
Resetting Your V460 Computer
Reset button
It may be necessary to reset the system if the computer stops responding or an application locks up.
The reset button is located on the V460’s outer casing. After pressing the “Reset” button, the
computer will boot up automatically.
Reset to factory default
The V460 embedded computer is based on Windows CE 6.0 and uses a CompactFlash card for the
internal file system. The WinCE 6.0 supports the FAT file system.
If you find that files, directories, or the FAT table are damaged because of an unstable power
supply or application issues, then you will need to reset to factory defaults. To do this, power on
the V460 computer, and then press 8 when you see the Windows CE startup screen. System
prompts will guide you through the step-by-step reset procedure.
2-2