User`s manual

V460 Series WinCE User’s Manual Introduction
1-5
Digital Input (V468 only)
Input Channels
8, source type
Digital input levels
Dry contact:
Logic level 0: Close to GND
Logic level 1: Open
Wet contact:
Logic level 0: +3V max
Logic level 1: +10 to +30V (COM to DI)
Protection
3 KV optical isolation protection
Connector Type
10-pin screw terminal block (8 points / COM / GND)
Digital Output (V468 only)
Output Channels
8, sink type
On-state Voltage
24 VDC nominal, open collector to 30 V
Output Current Rating
Max. 200 mA per channel
Protection:
3 KV optical isolation protection
Connector Type
9-pin screw terminal block
Other Peripherals
USB
USB 2.0 compliant hosts x 4, type A connector, supporting system
boot up
Audio
AC97 audio, supporting speaker-out interface
KB/MS
1 PS/2 interface supporting standard PS/2 keyboard and PS/2 mouse
via Y-type cable
Watchdog Timer
Supports 1 to 255 level time interval system reset, software
programmable
RTC
Comes with battery backup
PCMCIA
Cardbus card and 16-bit PCMCIA 2.1/ JEIDA 4.2 card (V462 only)
LEDs
System
Power x 1, Ready x 1, Storage x 1
LAN
V462: 10M/Link x 2 (on connector), 100M/Link x 2 (on connector)
V464: 10M/Link x 4 (on connector), 100M/Link x 4 (on connector)
V466: 10M/Link x 4 (on connector), 100M/Link x 4 (on connector)
V468: 10M/Link x 4 (on connector), 100M/Link x 4 (on connector)
Power Requirements
Power Input
9 to 36 VDC, 3-pin terminal block (V+, V-, SG)
Power Consumption
2820 mA @ 36V, 730 mA @ 9V
Physical Properties
Board Form Factor
EPIC
Dimensions (WxDxH):
260 x 135 x 50 mm (without wall mount kit)
Weight
1.36 kg
Construction Material
Aluminum
Mounting Options
DIN-rail, wall mounting
Environmental Limits
Operating Temperature
-10 to 60°C (14 to 140°F), 5 to 95% RH
-40 to 75°C (-40 to 167°F) is optional for -T models