User`s manual

V460 Series WinCE User’s Manual Introduction
1-4
Product Hardware Specifications
System
CPU
AMD Geode LX 800@0.9W processor with 128K L2 Cache, 500
MHz
System Chipset
AMD CS5536 chipset
FSB
400 MHz
Expansion Bus
On-board PC/104-Plus
BIOS
4 mega-bit Flash BIOS, supporting Plug & Play, APM 1.2
System Memory
200-pin SO-DIMM socket x 1 with built-in 256 MB DDRSupport
DDR400 up to 1GB
SRAM
256K SRAM, battery backup
OS
Windows CE 6.0, WindowsXP Embedded
Display
Graphics Controller
CPU Integrated 2D graphics
Display Interface
CRT Interface for VGA output
Network Communication
LAN
V462: Auto-sensing 10/100 Mbps x 2, RJ45 connector
V464: Auto-sensing 10/100 Mbps x 4, RJ45 connector
V466: Auto-sensing 10/100 Mbps x 4, RJ45 connector
V468: Auto-sensing 10/100 Mbps x 4, RJ45 connector
LAN Controller
Realtek RTL8100C
Protection
Built-in 1.5KV magnetic isolation protection
Serial Communication
Serial Ports
Ports 1 and 2: RS-232, DB9 male
Ports 3 4: RS-232/422/485, software-selectable, DB9 male
RS-232 signals: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422 signals: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w signals: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w signals: Data+, Data-, GND
Protection
Built-in 15 KV ESD protection for all signals
Data bits
5, 6, 7, 8
Stop bits
1, 1.5, 2
Parity
None, Even, Odd, Space, Mark
Flow Control
RTS/CTS, XON/XOFF, RS-485 ADDC™
Speed
50 bps to 921.6 Kbps; ports 3 and 4 support ANY BUAD RATE
Connector Type
D-Sub male 9-pin connector
Unmanaged Switch Communication (V466 only)
Switch Port
Unmanaged 10/100 Mbps switch ports x 8