User`s manual

V460 Series WinXP Embedded User’s Manual Getting Started
Starting and Stopping Services
Select Start Æ Control Panel Æ Administrative Tools and double click Services.
Simple Network Management Protocol (SNMP)
To check SNMP agent capabilities on a target V460-XPE (e.g., suppose the network IP is
192.168.3.127) computer, log on to the workstation computer on which the SNMP manager resides
and then type:
\> snmpwalk -v 2c -c public 192.168.3.127 system
You will see a series of messages from the SNMP agent on the V460-XPE computer that allow
you to monitor and manage the computer.
Serial Ports
V460-XPE embedded computers have 4 serial ports on the back panel. Ports 3 and 4 are designed to
provide reliable, high-speed, 3-in-1 (RS-232, RS-422, and RS-485) operation. Each of the ports
supports baudrates up to 921,600 bps.
Ports 1 and 2 are the embedded serial ports of the CPU chipset. They are standard 16550 UART
ports, and support a baudrate maximum Baudrate of 115,200 bps. Note that these two ports do not
support Hardware Flow Control.
The command line utility “SetInterface.exe” is for users to view and set the current operation mode.
2-6