User`s manual

V2416 WinXP User's Manual Introduction
1-5
Inserting a USB Mass Storage Device into the
Computer
Inserting a USB mass storage device will generate a new drive on the V2416-XPE. The new drive should be
visible in the File Explorer.
Inserting a CF Card in the Computer
Note that the V2416-XPE computer is shipped with a CompactFlash card already inserted and the Windows
Embedded Standard 2009 platform installed. However, if you have installed the operating system on the hard
disk, the CF card can be used for storage expansion. When inserted, the CF drive will be detected as a new disk
in the File Explorer.
The V2416-XPE does not support CF “Plug and Play” and “Hot Swap.” Please make sure to turn off
the computer before inserting a new CF card.