User`s manual

V2416 Series Software Configuration
2-14
1. Right-click the mxhtspd icon at the bottom right of the screen and then select Setting.
2. In the setting page, select the letter from the drop-down list for the specific hard disk. When finished, click
OK to complete.
Please note that if the disk has been split into several disk partitions, just specify the first main drive letter. For
example, if the disk in Disk 1 has been split as Disk D, Disk E, and Disk F, just set the Drive Letter as D. When
you push the LED on the Disk 1, Disk D, E, and F all can be safely removed.
Programming the Scripts
If you would like to customize the LED and button functions, use the scripts which are located under
C:\Program Files\MOXA\mxhtsp\script.