User`s manual

V2416 Series Software Configuration
2-9
Serial Ports
The V2416-XPE computer offers 4 serial ports, which can run RS-232, RS-422 or RS-485 serial interface. From
Control Panel  System  Hardware  Device Manager, click Ports (COM & LPT), you can see the four
serial ports named COM1, COM2, COM3, and COM4.
Right-click the port you would like to configure, and then select Properties.
Select Port Settings tab, you can configure the serial port settings, such as interface, baudrate, (supports up
to 921.6 Kbps), data bits, parity, stop bits and flow control method. Click OK to finish.