User`s manual

V2416 Series Software Configuration
2-7
• SNTP: In the Date and Time Properties window, you can see the NTP server setting.
Starting and Stopping Services
Select Start  Control Panel  Administrative Tools and double click Services. Select and right-click on
the service name, and then choose to stop or start.
Simple Network Management Protocol (SNMP)
To check SNMP agent capabilities on a target V2416-XPE (e.g., suppose the network IP is 192.168.3.127)
computer, log on to the workstation computer on which the SNMP manager resides and then type:
\> snmpwalk -v 2c -c public 192.168.3.127 system
You will see a series of messages from the SNMP agent on the V2416-XPE computer that allow you to monitor
and manage the computer.