User`s manual

V2416 Series Software Configuration
2-2
Starting Your V2416-XPE Computer
Connect the CRT monitor or LCD monitor to the target computer, and then power it up by connecting it to the
power adaptor. It takes about 30 to 40 seconds for the system to boot up. Once the system is ready, the
Desktop will appear on your monitor.
Resetting Your V2416-XPE Computer
Reset Button
A Reset button is located on the front panel of V2416-XPE. Press the reset button to shut down your
computer, just as you would do with a standard PC.
Software Shutdown / Reboot
Click Start
Turn Off Computer to reboot or shutdown the V2416-XPE computer.
Configuring the Display Settings
The V2416-XPE computer offers dual displays which allow users to connect the displays in VGA or DVI-I
interfaces. The default setting will allow one display only. If you would like to use dual displays, Use the
following steps to adjust display settings.
1. Double-click the display icon at the bottom right of the screen.