User`s manual

V2416 Hardware Manual Hardware Connection Description
3-6
Installing a CompactFlash Card
The V2416 embedded computers come with a CompactFlash socket. To insert a CompactFlash card, follow
these instructions:
1. Disconnect the V2416 from its power source.
2. The CompactFlash socket is located on the left side of the front panel. Unscrew the CompactFlash socket
cover.
3. There is a tenon/hook on the cover of the CF socket. Turn the CompactFlash card over and then insert the
CompactFlash card into the tenon/hook of the CF socket cover.
ATTENTION
Be careful of how you orient the CompactFlash
card. You should turn the CF card bottom side up, in order to
hook CF card into the CF socket cover.
4. Gently insert the CompactFlash card into the CF socket, making sure that the card is oriented correctly.
ATTENTION
The V2416 embedded computer does
not support the CompactFlash hot swap and PnP (Plug and Play)
functions. It is necessary to remove power source first before inserting or removing the CompactFlash card.