User`s manual

V2401/2402 HW User's Manual Introduction
1-3
• Product Warranty Statement (printed)
NOTE: Please notify your sales representative if any of the above items are missing or damaged.
Product Features
V2401/2402 series embedded computers have the following features:
• DDR2 SODIMM socket, supporting DDR2 533 up to 2 GB (max.)
• Dual independent display (VGA, DVI, LVDS selectable) (V2401: VGA, DVI and LVDS; V2402: VGA and DVI)
• Gigabit Ethernet ports
• RS-232/422/485 serial ports, supporting non-standard baudrates
• 8 RS-232 serial ports (V2401 only)
• 6 USB 2.0 ports for high speed peripherals
• DIs, 4 Dos
• CompactFlash socket for storage expansion
• Ready-to-run Embedded Linux, Windows CE 6.0, or Windows Embedded Standard 2009 platform
• -40 to 70°C wide temperature models available (V2402-T models)
V2401/2402 Hardware Specifications
Computer
CPU:
Intel Atom N270 1.6 GHz processor
OS (pre
-installed): Linux, Windows CE 6.0 or Windows Embedded Standard 2009
System Chipset:
Intel 945GSE + ICH7-M
BIOS:
8 Mbit Flash BIOS, SPI type, ACPI function supported
FSB:
400/533 MHz
System Memory:
1 x 200-pin DDR2 SODIMM socket support DDR2 533 up to 2 GB, built-in 1 GB
USB:
USB 2.0 compliant hosts x 6, type A connector, supports system boot up
Storage
Built
-in: 2 GB onboard industrial DOM to store OS
Storage
Expansion: CompactFlash socket for CF card expansion, supporting CF Type-
I/II socket with DMA
mode
HDD Support:
1 SATA-II connector for HDD expansion
Other Peripherals
KB/MS:
1 PS/2 interface supporting standard PS/2 keyboard and mouse through Y-type cable
Audio:
HD audio, with line-in and line-out interface
Display
Graphics Controller:
Intel Gen 2.5 Integrated Graphics Engine, 250 MHz core render clock and 200 MHz core
display clock at 1.05
-V core voltage
VGA Interface:
DB15 female connector
LVDS Interface: Onboard HIROSE DF13-40DP-1.25 V connector (V2401 only)
DVI Interface:
DVI-connector (chrontel CH7307 SDVO to DVI transmitter)
Ethernet Interface
LAN:
2 auto-sensing 10/100/1000 Mbps ports (RJ45)
Serial Interface
Serial Standards:
• V2401/2402: 4 RS
-232/422/485 ports*, software selectable (DB9 male connector)
• V2401 only: 8 RS-232 ports (68-pin VHDC connector)
*COM1’s pin 9 signal can be set by jumper as N/C (default), +5 V, or +12 V
ESD Protection:
4 KV for all signals