User`s manual

V2401/2402 WinXP User’s Manual System Recovery
4-7
Step 3: Change the BIOS Settings
On the V2401/2402-XPE computer, you need to change the BIOS settings to boot from USB disk.
Turn on the computer and press DEL to enter the BIOS setup menu. Select Hard Disk Boot
Priority and press Enter.
Select USB disk and then press “+” to make it the first boot device. Warning: Incorrect boot
disk priority will lead to recovery failure.
Press F10 and then press Enter to save and leave the BIOS setup.
ATTENTION
Please note that some USB disks will be regarded as the Removable Device. If it happens, see
the following steps.