User`s manual

MC-4510-C23 HW User’s Manual BIOS Setup
4-6
Advanced Chipset Settings
On-chip Frame Buffer Size
This item determines the frame buffer size for the VGA function, and will share the system
memory.
Options: 32MB, 64MB (default), 128MB
DVMT Mode
Sets the Dynamic Video Memory Technology operating mode. When set to “Fixed,” the graphics
driver will reserve a fixed portion of the system memory as graphics memory. When set to
“DVMT,” the graphics driver will dynamically allocate system memory as graphics memory,
according to system and graphics requirements. When set to “BOTH,” the graphics driver will
allocate a fixed amount of memory as dedicated graphics memory, as well as allow more system
memory to be dynamically allocated between the graphics processor and the operating system.
Options: Enable (default), Disable
Total GFX Memory
Sets the maximum amount of system memory that can be allocated as graphics memory.
Options: 128 MB, 256 MB (default), MAX.
Boot Display
This item allows you to choose which display interface will be shown when system is booting up.
Due to the display limitation, two displays at most can be shown when booting up. If you select
the default option, VBIOS Default", the displays that have been connected will be used as the
default displays.
Options: VBIOS Default (default), CRT, EFP1, EFP2, CRT+EFP1, CRT+EFP2