User`s manual

MC-4510-C23 HW User’s Manual Hardware Connection Description
3-16
4. When finished, place the bracket on the computer, and use four screws to fasten the bracket.
Next, connect the SATA cable to the SATA connector, and the power cable to the power
connector.
5. When you finish installing two hard disks on the computer, replace the back cover of the
computer, and fasten the screws.
6. When finished, use the ground sticker to attach the hard drive disk and the bracket. Make
sure that the metal parts of the hard drive disk and the bracket have been attached. If you are
using a solid state drive (SSD), you don’t need to attach this sticker.