User`s manual

MC-4510-C23 HW User’s Manual Hardware Connection Description
3-14
4. When finished, place the bracket on the computer, and use four screws to fasten the bracket.
Next, find the location of the power connect and the SATA connectors. There is one power
connector which can be used by two SATA hard disks, and there are two SATA connectors
for connecting two SATA disks.
5. Connect the power cable to the power connector and the SATA cable to the SATA
connector.
6. When finished, use the ground sticker to attach the hard drive disk and the bracket. Make
sure that the metal parts of the hard drive disk and the bracket have been attached. If you are
using a solid state drive (SSD), you don’t need to attach this sticker.