User`s manual

MC-4510-C23 HW User’s Manual Hardware Connection Description
3-12
6. After the first HDD bracket has been removed, you can find two memory modules. Carefully
remove the module by clicking the clutches at both sides of the module, and then replace the
new module. Be sure to orient the module correctly.
7. When finished, replace the first HDD bracket and the back cover of the computer.
Installing a SATA Hard Disk
The MC-4510-C23 has two SATA connectors for installing two SATA hard disks. To install the
2.5-inch SATA hard disks, follow these instructions.
After removing the back cover of the computer, find the HDD brackets in the following figure.
Please note that you can install your hard disk onto either HDD bracket. However, if you would
like to install an SSD type disk, we suggest you have it installed on the second HDD bracket.