Hardware manual

V2101 Hardware Introduction
1-4
Digital Input Levels for Wet Contacts:
• Logic level 0: +3 V max.
• Logic level 1: +10 V to +30 V (COM to DI)
Connector Type:
DB9 female
Digital Output
Output Channels:
3, sink type
Output Current: Max. 200 mA per channel
Output Voltage:
• Logic 0: 0
-0.55 V
• Logic 1: 2.5
-3.3 V
On
-state Voltage: 24 VDC nominal, open collector to 30 V
Connector Type:
DB9 female
LEDs
System:
Power, Storage
LAN:
100M/Link x 2, 1000M/Link x 2 (on connector)
Serial:
Tx, Rx
Switches and Buttons
Power Switch: on/off (side)
Reset Button:
For warm reboot (front side)
Physical Characteristics
Housing:
Aluminum
Weight:
940 g
Dimensions:
Without ears: 150 x 49 x 125 mm (5.91 x 1.93 x 4.92 in)
With ears: 178 x 52 x 125 mm (7.01 x
2.05 x 4.92 in)
Mounting:
DIN-Rail, wall, VESA
Environmental Limits
Operating Temperature:
-40 to 85°C (-40 to 185°F)
Storage Temperature:
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Anti
-vibration: 2 g rms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis
Anti
-shock: 20 g @ IEC-68-2-27, half sine wave, 11 ms
Power Requirements
Input Voltage:
9 to 36 VDC (3-pin terminal block for V+, V-, SG)
Power Consumption:
(without LVDS output)
With no
load on 4 USB ports:
• 1.88 A @ 9 VDC, 17 W
• 583 mA @ 24 VDC 14 W
• 422 mA @ 36 VDC 15 W
With full load on 4 USB ports:
• 3 A @ 9 VDC, 27 W
• 1 A @ 24 VDC, 24 W
• 700 mA @ 36 VDC, 25.2 W
Standards and Certifications
Safety:
UL 508, UL 60950-1, CSA C22.2 No. 60950-1-07, EN 60950-1, CCC (GB9254, GB17625.1)
EMC: EN 55022 Class A, EN 61000-3-2 Class D, EN 61000-3-3, EN 55024, FCC Part 15 Subpart B Class A
Green Product:
RoHS, cRoHS, WEEE
Reliability
Automatic Reboot
Trigger: Built-in WDT (watchdog timer) supporting 1-255 level time interval system
reset, software programmable
MTBF (mean time between failures):
231,633 hrs hrs
Warranty
Warranty Period: 3 years