Hardware manual

V2101 Hardware Introduction
1-3
• 2 RS-232/422/485 ports
• CompactFlash socket for storing OS
• 4 USB 2.0 hosts supporting system boot up
• Ready-to-run Embedded Linux, Windows CE 6.0, or Windows XPe platform
• -40 to 85°C wide operating temperature models for harsh environments
V2101 Hardware Specifications
Computer
CPU:
Intel Atom Z510PT 1.1 GHz processor
OS (pre
-installed): Linux, Windows CE 6.0 or Windows Embedded Standard 2009
System Chipset: Intel US15WPT
BIOS:
8 Mbit Flash BIOS, ACPI function supported (XPe model only)
FSB:
400 MHz
System Memory:
1 x 200-pin DDR2 SODIMM socket support DDR2 400 up to 2GB max, 1 GB built-in
USB:
USB 2.0 compliant hosts x 4, type A connector, supports system boot up
Storage
Built
-in: 2 GB CompactFlash to store OS
Storage Expansion:
SD socket for storage expansion
Other Peripherals
Audio:
AC97 audio, with line-in and line-out interface
Display
Graphics Controller:
Intel Graphics Media Accelerator, 500 Graphics, for 2D and 3D graphics
Video:
The Poulsbo XL SCH supports full hardware acceleration of video decode standards such as H.264,
MPEG2, MPEG4, and WMV9.
SDVO:
Chrontel CH7317 for VGA output (1280 x 1024 @ 85 Hz)
VGA Interface:
DB15 female connector
LVDS Interface:
18-bit or 24-bit single channel LVDS (1366 x 768 @ 85 Hz)
Ethernet Interface
LAN: 2 auto-sensing 10/100/1000 Mbps ports (RJ45)
Serial Interface
Serial Standards:
2 RS-232/422/485 ports, software selectable (DB9 male)
ESD Protection:
2 KV for all signals
Serial Communication Parameters
Data Bits:
5, 6, 7, 8
Stop Bits:
1, 1.5, 2
Parity:
None, Even, Odd, Space, Mark
Flow Control:
RTS/CTS, XON/XOFF
Baudrate:
50 bps to 115.2 Kbps
Serial Signals
RS
-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS
-422: TxD+, TxD-, RxD+, RxD-, GND
RS
-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS
-485-2w: Data+, Data-, GND
Digital Input
Input Channels:
3, source type
Input Voltage:
0 to 30 VDC at 5 KHz
Digital Input Levels for Dry Contacts:
• Logic level 0: Close to GND
•
Logic level 1: Open