Hardware manual

V2101 Hardware BIOS Setup
4-5
Boot Type
This item determines the boot type of the display. Select either CRT or LVDS.
Options: CRT (default), LVDS
LCD Panel Type
This item allows you to choose the resolution of the panel. From the list, select the correct resolution of your
panel.
Default: 1024x768 generic
Panel Scaling
This item allows you to zoom in and zoom out with the same ratio of the panel.
Options: Auto (default), Force, Off
Panel Data Format Select
This item allows to select the data format according to the LVDS display.
Options: 24 bit (default), 18 bit
ATTENTION
Note that you must select the correct resolution for your LVDS display based on your LVDS specifications, or it
will not be properly shown on your panel. When you encounter this problem, take the following steps:
1.
Press the Insert key after you hear the beep.
2.
Restart your computer and press the Del key while the system is booting up.
3.
Reconfigure the VGA setting in the BIOS menu and select the correct resolution and
data format for your LVDS
Peripherals