User`s manual

UPort 1400/1600 Series User’s Manual Driver Installation
2-5
Buzzer
UPort will sound the buzzer twice when the power is turned on. You will also hear the buzzer
when using the Locate function on the driver property page.
Connecting to a Serial Device
Connect the serial cable between UPort 1400/1600 and the serial device. UPort 1400/1600’s serial
ports use the RS-232 or RS-422/485 interface to transmit data. The port uses a standard male DB9
pin assignment.
LED Indicators
UPort 1400/1600 Series has several LED indicators, as described in the following table.
LED Name LED Color LED Function
Green Power is on
Active
Off Power is off, or power error condition exists
Orange Serial port is receiving data
Green Serial port is transmitting data
Tx/Rx
Off No data is being transmitted or received through the serial port
Installing the Driver for the Server
1. After connecting the USB cable from UPort to host the PC, Windows 2000 will automatically
detect the new UPort, and the Found New Hardware balloon will open in the bottom right
corner of the Windows desktop.
2. Select No, not at this time. Click Next to start the installation.