UPort 1400/1600 Series User’s Manual First Edition, June 2006 www.moxa.com/product MOXA Technologies Co., Ltd. Tel: +886-2-8919-1230 Fax: +886-2-8919-1231 Web: www.moxa.com MOXA Technical Support Worldwide: support@moxa.
UPort 1400/1600 Series User’s Manual The software described in this manual is furnished under a license agreement and may be used only in accordance with the terms of that agreement. Copyright Notice Copyright © 2006 MOXA Technologies Co., Ltd. All rights reserved. Reproduction without permission is prohibited. Trademarks MOXA is a registered trademark of the Moxa Group. All other trademarks or registered marks in this manual belong to their respective manufacturers.
Table of Contents Chapter 1 Introduction ..................................................................................... 1-1 Overview ...................................................................................................................1-2 Package Checklist......................................................................................................1-2 Product Features ........................................................................................................
1 Chapter 1 Introduction The MOXA UPort 1400/1600 are advanced USB-to-serial hubs that connect to 4, 8, or 16 RS-232 or RS-232/422/485 serial devices. The UPort 1400/1600 Series adds 4, 8, or 16 Windows serial COM ports via its USB connection, and is compatible with new and legacy RS-232 or RS-422/485 devices. This plug and play USB solution is perfect for mobile, instrumentation, and point-of sale applications.
UPort 1400/1600 Series User’s Manual Introduction Overview UPort 1400/1600 Series products are easy to use. Simply install the drivers, connect the UPort to your computer, plug in your serial devices, and you’re ready to go. Programming is NOT required, and you do not need to worry about IRQs, configuring a board, power requirements, or connection schemes. UPort 1400/1600 Series products are compliant with USB 1.0, 1.1, and 2.0 specifications, and meet the 480 Mbps high-speed requirement.
UPort 1400/1600 Series User’s Manual Introduction Product Specifications Models Names UPort 1410/1450, UPort 1610-8/1650-8, UPort 1610-16/1650-16 USB Compliant with USB 2.0, 1.1, 1.0 Connector USB type B Speed High speed 480 Mbps Serial No.
UPort 1400/1600 Series User’s Manual Introduction Panel Layout UPort 1410/1450 UPort 1610-8/1650-8 UPort 1610-16/1650-16 1-4
UPort 1400/1600 Series User’s Manual Introduction Dimensions UPort 1410/1450 UPort 1610-8/1650-8 1-5
UPort 1400/1600 Series User’s Manual Introduction UPort 1610-16/1650-16 1-6
2 Chapter 2 Driver Installation This chapter includes information about installing the UPort 1400/1600 USB-to-Serial Hub. We present the installation procedure for Windows 2000. The procedures for Windows XP/2003 (32 bit) and Windows XP/2003 (64 bit) are essentially the same as that for Windows 2000. We recommend installing the UPort 1400/1600 driver first, before connecting the UPort 1400/1600 USB-to-Serial Hub to your computer’s USB port.
UPort 1400/1600 Series User’s Manual Driver Installation USB Usage Limitations for UPort 1. A maximum of 4 UPorts can be connected to each host. Connecting more than 4 UPorts will cause system resources to become low and unstable. 2. We recommend connecting the UPort directly to the host USB port. If you need to use an external USB hub, only the first level is recommended. 3. In general, there are 2 types of USB hub: i.
UPort 1400/1600 Series User’s Manual Driver Installation 2. Click Next to install the driver in the indicated folder. 3. Click Install to proceed with the installation.
UPort 1400/1600 Series User’s Manual Driver Installation 4. The next window that opens cautions you that although this software has not passed Windows logo testing, the driver has already been tested and shown that it can support Windows OS. Click Continue Anyway to proceed. 5. Click Finish to complete the driver installation. Connecting the Hardware Before you connect the UPort via USB cable, we recommend that you install the driver first.
UPort 1400/1600 Series User’s Manual Driver Installation Buzzer UPort will sound the buzzer twice when the power is turned on. You will also hear the buzzer when using the Locate function on the driver property page. Connecting to a Serial Device Connect the serial cable between UPort 1400/1600 and the serial device. UPort 1400/1600’s serial ports use the RS-232 or RS-422/485 interface to transmit data. The port uses a standard male DB9 pin assignment.
UPort 1400/1600 Series User’s Manual Driver Installation 3. Select Install the software automatically (Recommended), and then click Next to continue. 4. Wait while the installation wizard searches for the correct drivers. The next window that opens cautions you that although this software has not passed Windows logo testing, this driver has already been tested and shown that it can support Windows OS. Click Continue Anyway to proceed.
UPort 1400/1600 Series User’s Manual Driver Installation 5. Wait while the driver software is installed. 6. The next window shows the model name of the board, and indicates that Windows has completed the driver installation. Click Finish to proceed with the rest of the installation procedure.
UPort 1400/1600 Series User’s Manual Driver Installation Installing the Driver for the Ports 1. The Found Next Hardware Wizard window will open to help you install the driver for Moxa Port 0. This window will offer to connect to the Windows update site to search for a driver. Select No, not at this time and then click Next to continue. 2. Select Install the software automatically (Recommended), and then click Next to continue.
UPort 1400/1600 Series User’s Manual Driver Installation 3. Wait while the installation wizard searches for the correct drivers. The next window that opens cautions you that although this software has not passed Windows logo testing, this driver has already been tested and shown that it can support Windows OS. Click Continue Anyway to proceed. 4. Wait while the driver software is installed.
UPort 1400/1600 Series User’s Manual Driver Installation 5. After all files have been copied to the system, the Completing the Found New Hardware Wizard window will open to indicate that it has finished installing Port 0. Click Finish to proceed with the rest of the installation. 6. Repeat Step 1 through Step 5 for each of the remaining 3 ports (UPort 1400), 7 ports (UPort 1600-8), or 15 ports (UPort 1600-16). The last port to be installed will be MOXA Port 3, 7, or 15, respectively. 7.
UPort 1400/1600 Series User’s Manual Driver Installation Configuring the Ports After the driver has been installed, use Device Manager to configure the UPort serial ports. 1. With the System Properties window open, click on the Hardware tab, and then click on Device Manager. 2. Expand the Multi-port serial adapters tab, right click MOXA UPort 1450 Series, and then click Properties to open the UPort’s configuration panel.
UPort 1400/1600 Series User’s Manual Driver Installation The Ports Configuration page settings are described below. Auto Enumerating COM Number If the “Auto Enumerating COM Number” checkbox is checked, COM numbers will be assigned automatically and in sequence to the ports. E.g., COM3 to Port 1, COM4 to Port 2, etc. If you do not enable this check box, only the first COM Number will be changed to new COM number list in the drop-down list box.
UPort 1400/1600 Series User’s Manual Driver Installation Tx Mode Setting Factory Default Necessity Hi-Performance, Hi-Performance Required Classical To improve write performance, you can select the Hi-Performance mode. Under classical mode, the driver will not notify the user’s program that Tx is completed until all Tx data has been sent out from the UPort; this mode will cause lower throughput. If you want to ensure that all data is sent out before further processing, classical mode is recommended.
UPort 1400/1600 Series User’s Manual Driver Installation Other Settings Reset default If you click the Rest default button, all the settings will return to Factory default settings: COM Number: Tx Mode: UART FIFO: Fast Flush: Interface: Hi-Performance Enable Enable RS-232 View All Settings: You can preview all ports settings with this function.
UPort 1400/1600 Series User’s Manual Driver Installation y Restore Read all settings from UPort as new settings. You still need to press the OK button to activate it. y Clear Clear the UPort setting which is stored in UPort Device. This operation is simliar to resettng all the settings to ther factory defaults. The following settings will be saved to UPort if you select Save: COM number, Friendly Name, Transmission Mode, FIFO settings, Fast Flush settings, and Interface.
UPort 1400/1600 Series User’s Manual Driver Installation Locate This function can help to identify the UPort location, especially when two or more UPorts are installed. This function will ask the UPort to flash the ready LED and turn on the Buzzer until you stop it. Uninstalling UPort If you want to remove the UPort device, you just need to remove the device from the Device Manager. The UPort driver will still stay alive enabling other UPort devices to keep working. 1.
UPort 1400/1600 Series User’s Manual Driver Installation 2. Expand the Multi-port serial adapters tab, right click MOXA UPort 1450 Series, and then click Remove to uninstall this UPort device. A window will pop up to confirm if you want to remove this UPort. 3. Click OK to continue uninstalling the UPort device. The UPort device will be removed from the list of Multi-port serial adapters. Uninstalling the Driver 1. To uninstall the driver, open the Control window, and click Add/Remove Programs.
UPort 1400/1600 Series User’s Manual 2. Driver Installation Select Moxa UPort Windows Driver Ver1.0. Click the Remove button.
UPort 1400/1600 Series User’s Manual Driver Installation 3. Wait while the driver software is uninstalled. 4. Click OK to proceed with the un-installation procedure.
3 Chapter 3 Pin Assignment UPort 1410 has 4 RS-232 ports, UPort 1450 has 4 RS-232/422/485 ports, UPort 1610-8/1610-16 has 8/16 RS-232 ports, and UPort 1650-8/1650-16 has 8/16 RS-232/422/485 ports.
A Appendix A Service Information This appendix shows you how to contact Moxa for information about this and other products, and how to report problems. In this appendix, we cover the following topics.
UPort 1400/1600 User’s Manual Service Information MOXA Internet Services Customer satisfaction is our primary concern. To ensure that customers receive the full benefit of our products, Moxa Internet Services has been set up to provide technical support, driver updates, product information, and user’s manual updates. The following services are provided E-mail for technical support................................support@moxa.com World Wide Web (WWW) Site for product information: .........................
UPort 1400/1600 User’s Manual Service Information Problem Report Form MOXA UPort 1400/1600 Customer name: Company: Tel: Fax: Email: Date: 1. 2. Moxa Product: Serial Number: UPort 1410 UPort 1450 UPort 1610-16 UPort 1650-16 UPort 1610-8 UPort 1650-8 _________________ Problem Description: Please describe the symptoms of the problem as clearly as possible, including any error messages you see.
UPort 1400/1600 User’s Manual Service Information Product Return Procedure For product repair, exchange, or refund, the customer must: Provide evidence of original purchase. Obtain a Product Return Agreement (PRA) from the sales representative or dealer. Fill out the Problem Report Form (PRF). Include as much detail as possible for a shorter product repair time. Carefully pack the product in an anti-static package, and send it, pre-paid, to the dealer.
